Description

Micro filter regulator model PPH(U)3~PPH(U)4
PPH(U)3~PPH(U)4 micro filter regulator is another component of the industrial system. This part is used in places where there are pneumatic systems. The air around us that we breathe has some moisture.
When this air is compressed, the moisture along with it is also compressed.

The compressed moisture is collected at the bottom of the compressor, but still a large amount of it is transferred by air to the equipment. Moisture seriously damages the equipment. Filters filter this moisture and do not allow moisture and contamination to be transferred to the equipment.

The collected water is collected in the filter cup or is drained by the automatic drain. The air that has been filtered must be brought to the right pressure and its pressure must be reduced and actually regulated. The act of regulating is done by the regulator (pressure breaker) and the air is filtered and transferred to the equipment with the right pressure.

The sizes of micro filter regulator model PPH(U)3~PPH(U)4
Filter regulators are in different sizes and models, which include the following items.

1. The filter sizes of the regulators are: 3″, 2″, 1″, 3/4″, 1/2″, 3/8″, 1/4″, 1/8″.

Micro filter regulator model PPH(U)3~PPH(U)4
Micro filter regulator model PPH(U)3~PPH(U)4
2. Drainage of moisture (water) in manual draining models, semi-automatic draining and fully automatic draining. Air regulator filter structure:

The air regulator filter consists of several main parts, which include the following:

1. Inlet air adjustment regulator along with wind indicator to observe the inlet air pressure

2. 5 micron fiber or brass filter to capture air moisture and the moisture holding chamber separated from the incoming air

3. The outlet port for the discharge of moisture separated from the inlet air, the filter function of the air regulators:

The function of the regulator filter is that the incoming air enters the air adjustment regulator, which can be adjusted from 10 to 0 bar by the air pressure regulator.

Then, after passing through the regulator, the incoming air enters the 5 micron dehumidifier filter and is separated by the incoming air humidity filter, and the dry air without any moisture is directed to the regulator filter outlet and then transferred to the ventilation system.

Micro filter regulator model PPH(U)3~PPH(U)4 or Filter Regulator is one of the industrial parts in the important care unit which is used in many small and large industries. The accuracy and application of standards are important indicators of any industry, and in better words, the lack of these two indicators can create important challenges and disturbances.

Industry and engineering have a direct and continuous relationship with each other, and since measurement accuracy is one of the most important discussions in engineering, as a result, in industry, which is dependent on engineering plans, measurement and accuracy are of great importance. . In the industry, the more accurate the measurement, the less the percentage of errors and the higher the efficiency and also the success of the project.

In other words, in the industry and production, there are indicators and standards that must be followed seriously. To comply with these standards, specialized companies are working all over the world and each of them produces special parts. In simpler terms, various tools are designed to apply accurate measurements in industries, and several pieces together manage and control a part of an industry.

The scope of diversity of measuring instruments in industries is very large. Some of these tools have the ability to measure instantaneously, and by using today’s technologies, such as digital data, they announce the instantaneous measurement, and some other instruments also have a mechanical function, but they are designed and produced based on engineering principles. are

Standard working conditions of micro filter regulator model PPH(U)3~PPH(U)4
The regulator filter can be used at a temperature of +40 to -5 degrees Celsius and with a fluid pressure of 10 to 0 bar. Note that if the incoming air is stained with oil or grease, the dehumidifier filter will be greased and unable to absorb moisture.

Applications of PPH(U)3~PPH(U)4 micro filter regulator:
The reason for using filter regulators in the ventilation system is to separate moisture from the air, because if the air used contains moisture, it will cause irreparable problems, which we will mention a few of:

1. Rotting and loss of all O-rings and packings in the air steering jacks and valves and oxidation, rotting and rusting of the body of the air steering jacks and valves.

2. In the paint industry, we can mention the creation of water holes, the unevenness of the paint surface and many different problems. He pointed out in machine building, food, pharmaceutical, health, construction, oil, gas, petrochemical and other industries.

Criteria for the regulator filter stone material:
Filter material (brass filter-felt filter)
Filter micronization (from forty microns to one hundredth of a micron)
Appearance and dimensions of the filter
Usually, filter stone (filter element) with 40 or 20 micron is used in the filter of existing regulators.
20 micron stone is used in felt filters.
Definition of Prerequisite Care Unit Introduction of Filter Regulator
The filter regulator is one of the parts used in the maintenance unit of pneumatic systems. In this article, the care unit is the same as the pneumatic care unit, and we intend to introduce one of the most important parts of this section, the regulator filter.

Pneumatic systems are used in various industries and in industrial machines. Pneumatic systems, like their importance, are sensitive to different conditions, including polluted and humid air, and they must be supplied with healthy air to have proper efficiency.

For this reason, different parts are used to create suitable conditions, and their collection is called a care unit.

The care unit is a set whose design purpose is to create suitable conditions for the operation of the pneumatic system. This care unit includes parts such as regulator, filter regulator and oiler. Among the most important types of care units that are popular in the Iranian market, we can mention these brands:

Metal work made in Italy
Airtech
SKP South Korea
Festo Germany
Aventics (Germany)
Aignep (Italy)
Shako
Filter Regulator is the main topic of this article, and in the rest of this text, we intend to provide specialized information about the filter regulator, but since the Filter Regulator is related to other parts of a pneumatic care unit, at first, briefly We will introduce other components of this care unit, such as oiler and regulator.

Introduction to the introduction of PPH(U)3~PPH(U)4 model regulator micro filter
Micro filter regulator model PPH(U)3~PPH(U)4 is one of the parts that is used next to the oiler in the maintenance unit of pneumatic systems. In the pneumatic systems care unit, different parts must work together so that the overall process of a project is done well.

For this reason, the compactness of the work and the proximity of the parts can cause friction and locking of a part and disrupt the functioning of a set. In order to solve this problem and prevent disruptions in the work of the care unit as well as serious breakdowns of the devices, it is recommended that oil-consuming parts be lubricated in defined time intervals by a specialized device.

To do this, the lubricant is used in the care unit. In fact, to inject oil into parts such as actuators and valves, the required oil is injected into the system’s compressed air by the lubricator. The lubricating oil consists of different parts and by means of it the required amount of oil can be injected into the system.

Different oils can be injected into a pneumatic system by using an oiler. Choosing the type of oil and its amount is an important and specialized issue that the experts of a project should decide on.

Getting to know the regulator, introduction to the introduction of the regulator filter
PPH(U)3~PPH(U)4 model regulator micro filter is one of the main parts of industrial regulators. And to get to know this piece, we need to get to know the regulator first. Regulator (in English regulator) is a word that is derived from the word regulate which means flow regulator. In other words, a regulator is a part that is used to control and adjust the input of a material to a system.

These inputs can include vaporized liquids, gases, and even electrical voltages. In general, the regulator adjusts the flow to a system with a certain amount of pressure determined for it. Due to the fact that the input material to the regulators is different, and the systems in which the regulators are used are different and wide, as a result, various examples of the regulator have been produced, among which the following can be mentioned:

Gas regulator
Electric regulators
Fluid regulators
Filter Regulator PPH(U)3~PPH(U)4 model gas or pneumatic micro filter regulator is a piece that is mainly used for industrial and household regulators. In general, regulators are divided into two categories: household and industrial regulators, which are familiar to all of us and are parts that are used to adjust the gas pressure of cylinders and household gas in general, but in contrast to these small parts, professional industrial regulators are located

Industrial regulators are usually produced for large tanks and high pressures. These regulators have special features according to the industry they are used in. For example, these regulators must be made of resistant materials and have resistance against gases, corrosive liquids, and sometimes toxic and putrid.

Industrial regulators are equipped with various parts, one of the most important of which is the filter regulator micro-filter regulator model PPH(U)3~PPH(U)4, which we will introduce in the rest of this text.

Types of regulator filters
Micro filter regulator model PPH(U)3~PPH(U)4 is a small but very important industrial part that has an effective role in performing various operations of a project. In fact, this part is considered a part of the monitoring unit of a system. Gas or pneumatic regulators are the most common types of regulators used in the industry. These regulators need an important part to apply standardization of intake air for proper and principled operation, and this important part is the regulator filter.

PPH(U)3~PPH(U)4 model regulator micro filter is a part that is necessary for the operation of the regulator. In fact, the air in the environment that we breathe contains some moisture. Humidity is the amount of heat present in a unit volume of air.

Air enters pneumatic systems in a compressed form and this problem causes the accumulation of moisture in these systems, especially the bottom of the compressors, as a result of which decay and failure occur in these equipments. Filter Regulator is used to prevent this unpleasant event. The regulator micro filter model PPH(U)3~PPH(U)4 absorbs the moisture present in an inlet and makes a system work better.

Filter Regulator as an important part is made up of different parts. For example, the water in the inlet gas accumulates in the filter cup over time and is drained manually or automatically depending on the type of filter.

A filter regulator is also used to prevent dust from entering a pneumatic system. In some areas as well as work environments, dust is part of the environmental conditions, for this reason, the work systems of a project are taken care of by this part. Filter Regulator Micro filter regulator model PPH(U)3~PPH(U)4 as an important functional part in regulators, it is produced from different raw materials and has various sizes that should be selected and purchased based on the type of regulator. .

PPH(U)3~PPH(U)4 model regulator micro filter as an important part of an industrial regulator, and a part of the care unit of a system, can be classified in different ways. For example, this important part is produced from different raw materials, which must be resistant to different environmental conditions. Among these materials, we can mention brass metal as well as felt filters. As a result, the type of raw materials can be considered as a factor for the division of regulator filter types.

The regulator filter is also produced in different sizes. Each size is used in certain systems and cases. The most important sizes of filter regulator micro filter regulator model PPH(U)3~PPH(U)4 can be one inch, three quarters of an inch, one quarter of an inch, one half of an inch, one eighth of an inch, three eighths of an inch, two inches, He pointed out one and a half inches as well as one and a quarter inches.

Of course, two-part sizes such as three-quarter inches are available in one piece and sizes such as one and a half inches are offered in two pieces due to their larger dimensions and are used in certain systems.

The regulator micro filter model PPH(U)3~PPH(U)4 is a piece that absorbs the moisture in the compressed air and must be drained after reaching the set amount. The discharge of this part is done manually and automatically, and for this reason, the regulator filters are also produced in two types, automatic and manual.

Filter Regulator Micro filter regulator model PPH(U)3~PPH(U)4 is an industrial part that is produced by various companies around the world today and each brand claims to produce quality products, for this reason filters can be He also divided the regulator into different categories based on the manufacturing brand. But in general, it is recommended to buy reliable and quality brands only through reliable sales centers.

Important points on how to install all types of regulator micro filter models PPH(U)3~PPH(U)4
Micro filter regulator model PPH(U)3~PPH(U)4
Micro filter regulator model PPH(U)3~PPH(U)4
PPH(U)3~PPH(U)4 model regulator micro filter is considered as one of the main and important parts of devices based on pneumatic systems, the presence of a malfunction in which can cause irreparable damage to a project and Import its machinery. This item is one of the most important points that should be taken into account when buying the filter regulator micro filter regulator model PPH(U)3~PPH(U)4. As a result, it is necessary to buy a quality and suitable piece.

Micro filter regulator model PPH(U)3~PPH(U)4 is a part that is produced in different models and capacities, and for this reason, in the first step of buying a regulator filter, you should know your needs in order to be able to choose based on His true and correct need made a successful purchase. Since the regulator is produced in a variety of different models, it is necessary to purchase a suitable size filter for a regulator.

Filter Regulator Micro filter regulator model PPH(U)3~PPH(U)4 is available in the market in different types and brands with different prices. Naturally, most buyers tend to make their purchase with the best quality and the most appropriate price. But the important thing is to buy regulator filters with a sales guarantee. Most of the big companies producing this part offer their products with a sales guarantee, it is recommended to pay attention to the warranty of the purchased product when buying.

Micro filter regulator model PPH(U)3~PPH(U)4 is a piece that is produced today by various companies around the world and some of these brands that are produced by professional companies are famous and popular, but In addition to the popular brands of Filter Regulator micro filter regulator model PPH(U)3~PPH(U)4, there are also low quality samples whose use can endanger the health of work and parts of a project.

For this reason, it is recommended to visit reputable agencies to buy popular and well-known brands of industrial regulator filters. Today, due to the importance of this part in different industries, agencies of different brands have been set up in different provinces of Iran that offer quality products.

Advantages of buying Filter Regulator from reputable dealers
Micro filter regulator model PPH(U)3~PPH(U)4 is an important part that can be purchased in the market in different ways. Usually, industrial supply stores supply this part like other tools and parts in a normal way, and they do not accept any obligation against product failure or after-sales service, and this issue can be changed in the future. In case of possible failure of the part, it will be to the detriment of the buyers.

For this reason, it is recommended to buy all kinds of regulator filters from reputable dealers. Among the most important advantages of buying this product from reputable dealers are the following:

Buying the original products of each brand: To buy a specific brand of regulator filters, micro filter regulator model PPH(U)3~PPH(U)4, you should refer to the authorized dealers of the same brand.
For example, some reputable and best-selling brands of Filter Regulator Micro Filter Regulate

The PPH(U)3~PPH(U)4 models have attracted the attention of profit-seeking collections in East Asian countries, and counterfeit samples from reputable brands have entered the market, which unfortunately look similar to the original samples, and for this reason And to avoid unknowingly buying fake products, it is recommended to buy from reputable dealers of the desired brand.

Buy regulator filter micro filter regulator model PPH(U)3~PPH(U)4 at a great price: regulator filter model PP4 is a product that has different prices in different stores, but to buy any brand at the best price, it is recommended to visit the dealer refer to the official
Receiving after-sales service: The regulator filter is a part that must be installed according to defined standards. Usually, in the official agencies of different brands of PPH(U)3~PPH(U)4 micro filter regulator, there are people who can give you free advice and guidance to buy the right product and how to install it.