Beschreibung

SQ model automatic fitting
Pneumatic fittings are used to connect different parts of the pneumatic system, hoses and pipes. Pneumatic fittings are stronger and more resistant than hydraulic fittings. For this reason, while connecting parts in pneumatic systems, less pressure is applied to the connections and parts.

Pneumatic connections or fittings are used to create a connection between the parts and components of a pneumatic system and circuit. For example, in a pneumatic system that includes a pneumatic valve, a pneumatic jack with speed control, various connections are used to connect these components to each other and to the compressed air of the main inlet.

Pneumatic fittings are among the most widely used pneumatic devices that are used to connect and communicate between different components of pneumatic systems. By purchasing the pneumatic SQ model automatic fitting, you will see an increase in the speed of operation in the progress of pneumatic systems and works. Due to the fact that pneumatics are made up of different components, it is obvious that you will need to purchase several pneumatic fittings in different dimensions and features.

Similarly, in building water piping, various connections such as elbows, bushings, spools, etc. are used to connect different components (such as pipes to each other, pipes to faucets, etc.). SQ pneumatic automatic fitting is made of various materials such as polymer and metal materials (iron with chrome coating and brass).

SQ model automatic fitting application
Pneumatic connectors are used to connect pneumatic components, and miniature connectors are used to change the inlet air pressure or change its direction. Pneumatic fittings are considered as precise tools in control.

Air or pneumatic connections are one of the most important parts in the compressor. Without these parts, you cannot use the air effectively and even if the device is not installed correctly, the compressor may be damaged. We have included the best pneumatic (air) fittings in our product list for your review so that you can find the right part to meet your compressor needs.

Having a reliable quick connect for air compressors is exactly the difference between a quality compressor and a serious hazard, and can help the consumer increase the compressor’s air supply and possibly manage more complex connections. To optimize the life of your equipment, invest in buying high-quality and durable connections.

These connections are the link between pipes, hoses and machines. Therefore, having a complete communication is essential for safety. This SQ model automatic fitting is very suitable for controlling air flow pressure and directional flow.

SQ model automatic fitting components
Pneumatic fittings may include parts such as pipes, tubes and hoses.

Hose:
Layers of different materials are used to make the hose. Hoses are highly flexible and provide suitable conditions for the movement of parts. Hoses need to be replaced after some time. It becomes necessary to replace the hose when it wears out.

Pipe:
Solid materials are used to make the pipe. These types of joints appear hard and rigid.

tobacco pipe:
Pipes are also made of solid materials and have significant hardness. Pipes are less flexible than pipes.

The way the parts work and connect in the pneumatic system is different. In fact, this difference in appearance causes the automatic connection (fitting) of the mentioned SQ pneumatic model in various forms.

L fittings
Some of these connections are L-shaped or elbow. L joints are introduced as angle joints. The angle considered for L connections is 90 degrees. L-shaped pneumatic connections allow multi-purpose or single hoses to be connected. With a pneumatic elbow fitting, the connection of the system can be easily changed by means of a set of pipes.
These types of connections are very compact and require little space. Pneumatic fitting is very useful and excellent for working with nylon pipes.

Direct connections
Pneumatic connections can be of direct type. In direct connections, one direction of the part is connected to the hose or pipe and the other direction is connected to other parts of the system. Bolts and nuts are used to fix these connections. The pneumatic direct fitting acts as an adapter.
These fittings are available in different materials, thread sizes, diameters and grades. Direct pneumatic connections can be used with various tools. For this reason, direct connections are used a lot in the pneumatic system.

T connection
Pneumatic connections can be T-shaped. These connections are used with a pressure mechanism. T-shaped fittings are intended for safe and secure connection to threaded ports and support quick and easy installation without the need for tools. By establishing this connection, the parts can be placed side by side in a three-sided form.
The most common application of T-shaped fittings is related to pressure or vacuum applications. The leakage of these T-shaped connections is very low and these connections are designed in the form of a complete hole.

Y joints
Y-shaped pneumatic joints can be used for various things such as air tools, textile, transportation applications, automotive, industrial airlines, garages, packaging, robotics, etc. Pneumatic Y-shaped connections are introduced with features such as fast disconnection and connection and tank strength against vacuum.

Functional connections
Pneumatic fittings can

be divided according to the type of function. The body of the pneumatic fitting can be copper, aluminum, steel, PBT and Bern. Functional pneumatic fittings are used for functions such as shut-off, flow regulation, supply, exhaust and blocking.

Communication connections
Pneumatic fittings are also classified according to the type of connection.

Ball joint
Ball pneumatic fitting is used to connect the outer sleeve to the inner fitting. Sleeves are used to disconnect and connect two ends of connections. This type of connection is used for things that require frequent connection and disconnection of the hose.

Compressor connection
The connections mentioned can be compression or compressor type. In this type of connections, pressure is used to establish the connection. Rings, metal washers and ferrules are used for standard compression and connection. In such a case, the nut is used on the ferrule and pipe for compression. With this nut, it is possible to strengthen and compress the parts together.

SQ model automatic fittings
Pneumatic fittings are differentiated based on the type of connection and the function they perform. And they are produced in different sizes and types, each of which is used in different uses. Among these connections, we can mention the direct connection, which is available in direct allen-khor, panel direct, plastic bead direct, and direct connection between ways.

One of the most widely used pneumatic parts are pneumatic tees. There are different types of tees, tees that feed hoses or tees with hose heads, tees in the middle of the rib and inside the thread, and miniature tees are of this category.

The variety of pneumatic connections is very large. In general, connections can be divided into four main parts.

1- Connections with only connection function: This type of connections can be divided into the following two types: 1- Connections with one gear end and one hose end 2- Connections with two hose ends

Connections with a gear end and a hose end
It is used to connect pneumatic hoses to pneumatic valves or pneumatic manifolds. When buying this type of connection, you should pay attention to the size of the gear, the standard of the gear, the size of the connecting hose, the type of gear (male or female), whether or not it has O-rings, and the physical shape of the connection. SQ model automatic fitting

Connections with two hose ends
It is used to connect two pneumatic hoses to each other or change the connection size. For example, PUC-06 connector is used to connect two size 6 hoses. When buying this type of connection, we should pay attention to the size of the hose and the physical shape of the connection.

2- Connections with special functions: In addition to connecting two parts, this type of connections also have the following special functions.

Types of flow controller:
Flow controls are used to control flow rate or air flow. One of the important applications of flow control is controlling the movement speed of pneumatic jacks in the industry. Fluocontrollers are available in different types of flowcontrollers (with two hose feeding ends) and jackhead flowcontrollers (to connect to pneumatic jacks). SQ model automatic fitting.

Stop fittings:
In addition to the connection, these parts act as a one-way valve, and if the hose is placed in it, the air flow is established, and if the hose is removed, the air flow is automatically cut off. In using this connection, you should pay attention to its input and output. When buying, we should pay attention to the size of the hose and its thread. SQ model automatic fitting

Check Valve:
This type of connection is used to make the air path unidirectional. In using this connection, you should pay attention to its input and output. Also, when buying, you should pay attention to the size of the hose and its thread. It should be noted that the maximum working pressure of pneumatic connections is 10 bar, and if the pressure increases beyond this amount, there is a possibility of leakage and disconnection of the connection. SQ model automatic fitting

3- Connections for acidic substances and water:
There are also connections that are completely made of plastic and are used for water and acidic things. SQ model automatic fitting

4- Couplings:
Couplings are used to temporarily connect two parts of a system. For example, in gas pumps, the fuel nozzle is connected to a coupling, and when refueling, this nozzle is connected to the car’s gas tank by the coupling, and after refueling, it is separated from the car.
Couplings are available in various sizes and in the form of male and female threads, hose connectors, and you should pay attention to these items when buying. SQ model automatic fitting

Special features of SQ model automatic fitting
• The pneumatic fitting can withstand a working pressure of 24 bar according to the size of the design.
• The ability to install and use pneumatic system connections is very convenient and easy. Therefore, this SQ model automatic fitting will be different from other systems.
• The rib part of the fittings is made of brass and PBT material can be seen in their body part.
• The metal parts of the connections are also plated with nickel or zinc.
• NBR O-rings are used to prevent leakage of connections.
• Connections of the pneumatic system are supplied in the form of three-way middle rib, swivel knee, straight, etc. This diversity in design causes diversity in the application of SQ model automatic fitting.
• Various types of NPT, BSPT, METRIC and BSP are used for SQ model automatic fittings.
Important cut when using SQ model automatic fitting
After purchasing Etsa

L (fittings) SQ pneumatic automatic model, when using these pneumatic parts, you should pay attention to a series of points and do not use pneumatic connections in the following conditions:

1- For other uses other than what that particular pneumatic connection was designed and made for.

2- Never touch the part of the automatic connection (fitting) of the SQ pneumatic model when they are under pressure. (Because this will cause the hose to separate and lead to damage).

3- In places where excessive external pressure is applied to the pneumatic connection due to stretching, bending or twisting (because it causes the body of the pneumatic connection to break and create dangerous situations).

4- In places where there is excessive vibration, rotation and bending.

5- In places where SQ pneumatic automatic fittings are exposed to corrosive, inflammable fluids, chemicals, sea water, or water vapor.

Also, when buying pneumatic SQ model automatic fittings, you should note that these parts should not be used in machines that are used for purposes such as human life safety, human transportation, or emergency safety tools in general.

Use SQ pneumatic automatic fittings only when all impurities such as dust have been removed from them.