No products in the cart.
SP4000 large body metal flow control
● The holder prevents accidental loss of the needle
● Compact size saves space
● Speed must be carefully controlled even at low speed
● Lock nut
● Copper free type for electronics industry (optional)
● Compact size saves space
● Speed must be carefully controlled even at low speed
● Lock nut
● Copper free type for electronics industry (optional)
Add to wish list
Add to wish list
Categories: brand, Large body metal flow control, Pneumatic, Pneumatic fittings, TPC, TPC fittings
Brand: TPC
Description
SP4000 large body metal flow control
Pneumatic fittings are used to connect different parts of the pneumatic system, hoses and pipes. Pneumatic fittings are stronger and more resistant than hydraulic fittings. For this reason, while connecting parts in pneumatic systems, less pressure is applied to the connections and parts.
Pneumatic connections or fittings are used to create a connection between the parts and components of a pneumatic system and circuit. For example, in a pneumatic system that includes a pneumatic valve, a pneumatic jack with speed control, various connections are used to connect these components to each other and to the compressed air of the main inlet.
Pneumatic fittings are among the most widely used pneumatic devices that are used to connect and communicate between different components of pneumatic systems. With the purchase of SP4000 model SP4000 pneumatic flow control, you will see an increase in the speed of operation in the progress of works and pneumatic systems. Due to the fact that pneumatics are made up of different components, it is obvious that you will need to purchase several pneumatic fittings in different dimensions and features.
Similarly, in building water piping, various connections such as elbows, bushings, spools, etc. are used to connect different components (such as pipes to each other, pipes to faucets, etc.). SP4000 pneumatic large body metal flow control is made of various materials such as polymer and metal materials (chrome coated iron and brass).
The application of SP4000 large body metal flow control
Pneumatic connectors are used to connect pneumatic components, and miniature connectors are used to change the inlet air pressure or change its direction. Pneumatic fittings are considered as precise tools in control.
Air or pneumatic connections are one of the most important parts in the compressor. Without these parts, you cannot use the air effectively and even if the device is not installed correctly, the compressor may be damaged. We have included the best pneumatic (air) fittings in our product list for your review so that you can find the right part to meet your compressor needs.
Having a reliable quick connect for air compressors is exactly the difference between a quality compressor and a serious hazard, and can help the consumer increase the compressor’s air supply and possibly manage more complex connections. To optimize the life of your equipment, invest in buying high-quality and durable connections.
These connections are the link between pipes, hoses and machines. Therefore, having a complete communication is essential for safety. This SP4000 large body metal flow control is very suitable for controlling air flow pressure and directional flow.
SP4000 large body metal intermediate flow control components
Pneumatic fittings may include parts such as pipes, tubes and hoses.
Hose:
Layers of different materials are used to make the hose. Hoses are highly flexible and provide suitable conditions for the movement of parts. Hoses need to be replaced after some time. It becomes necessary to replace the hose when it wears out.
Pipe:
Solid materials are used to make the pipe. These types of joints appear hard and rigid.
tobacco pipe:
Pipes are also made of solid materials and have significant hardness. Pipes are less flexible than pipes.
The way the parts work and connect in the pneumatic system is different. In fact, this difference in appearance causes the existence of the above-mentioned SP4000 large body metal flow control in various forms.
L fittings
Some of these connections are L-shaped or elbow. L joints are introduced as angle joints. The angle considered for L connections is 90 degrees. L-shaped pneumatic connections allow multi-purpose or single hoses to be connected. With a pneumatic elbow fitting, the connection of the system can be easily changed by means of a set of pipes.
These types of connections are very compact and require little space. Pneumatic fitting is very useful and excellent for working with nylon pipes.
Direct connections
Pneumatic connections can be of direct type. In direct connections, one direction of the part is connected to the hose or pipe and the other direction is connected to other parts of the system. Bolts and nuts are used to fix these connections. The pneumatic direct fitting acts as an adapter.
These fittings are available in different materials, thread sizes, diameters and grades. Direct pneumatic connections can be used with various tools. For this reason, direct connections are used a lot in the pneumatic system.
T connection
Pneumatic connections can be T-shaped. These connections are used with a pressure mechanism. T-shaped fittings are intended for safe and secure connection to threaded ports and support quick and easy installation without the need for tools. By establishing this connection, the parts can be placed side by side in a three-sided form.
The most common application of T-shaped fittings is related to pressure or vacuum applications. The leakage of these T-shaped connections is very low and these connections are designed in the form of a complete hole.
Y joints
Y-shaped pneumatic joints can be used for various things such as air tools, textile, transportation applications, automotive, industrial airlines, garages, packaging, robotics, etc. Pneumatic Y-shaped connectors with features such as disconnecting and connecting the head
[caption id="attachment_5203" align="aligncenter" width="1456"]
فلوکنترل بین راهی فلزی بدنه بزرگ مدل SP4000[/caption]
Additional information
| برند ها |
|---|
Quick Comparison
| Settings | SP4000 large body metal flow control remove | Flow control metal SPM model remove | SPSA model digital pressure switch remove | APM model finger mini jack remove | SP2000 small body metal intermediate flow control remove | SQ model automatic fitting remove | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | SP4000 large body metal flow control remove | Flow control metal SPM model remove | SPSA model digital pressure switch remove | APM model finger mini jack remove | SP2000 small body metal intermediate flow control remove | SQ model automatic fitting remove | ||||||||||||||
| Image | |  |  |  |  |  | ||||||||||||||
| SKU | ||||||||||||||||||||
| Rating | ||||||||||||||||||||
| Price | ||||||||||||||||||||
| Stock | Out of stock
| |||||||||||||||||||
| Availability | Out of stock | |||||||||||||||||||
| Add to cart | ||||||||||||||||||||
| Description | ● The holder prevents accidental loss of the needle
● Compact size saves space
● Speed must be carefully controlled even at low speed
● Lock nut
● Copper free type for electronics industry (optional)
| ● Minimizes installation time and cost
● 360 body rotation.
● The speed can be accurately controlled even at low speeds
● Constant speed is easily adjusted
|
● High precision semiconductor pressure sensor
● Red LED with high brightness (number: 9.5 mm)
● Convertable pressure unit
● Different output modes
● Preventive function of output
● Analog output (1-5VDC)
● Current protection circuit, reverse polarity protection circuit
|
| ● The holder prevents accidental loss of the needle
● Compact size saves space
● Speed must be carefully controlled even at low speed
● Lock nut
● Copper free type for electronics industry (optional)
| ● ONE ACTION inserts tube for easy attachment and release
● The volume and OD are smaller than the conventional type, but the same flux is obtained
● Surface treated with electroless nickel plating for excellent corrosion resistance
● The oval sleeve is designed to be easily released in confined spaces
● The screw part has O-rings or has a sealant coating
● Small fittings for small appliances and piping in confined spaces
| ||||||||||||||
| Content | SP4000 large body metal flow control Pneumatic fittings are used to connect different parts of the pneumatic system, hoses and pipes. Pneumatic fittings are stronger and more resistant than hydraulic fittings. For this reason, while connecting parts in pneumatic systems, less pressure is applied to the connections and parts. Pneumatic connections or fittings are used to create a connection between the parts and components of a pneumatic system and circuit. For example, in a pneumatic system that includes a pneumatic valve, a pneumatic jack with speed control, various connections are used to connect these components to each other and to the compressed air of the main inlet. Pneumatic fittings are among the most widely used pneumatic devices that are used to connect and communicate between different components of pneumatic systems. With the purchase of SP4000 model SP4000 pneumatic flow control, you will see an increase in the speed of operation in the progress of works and pneumatic systems. Due to the fact that pneumatics are made up of different components, it is obvious that you will need to purchase several pneumatic fittings in different dimensions and features. Similarly, in building water piping, various connections such as elbows, bushings, spools, etc. are used to connect different components (such as pipes to each other, pipes to faucets, etc.). SP4000 pneumatic large body metal flow control is made of various materials such as polymer and metal materials (chrome coated iron and brass). The application of SP4000 large body metal flow control Pneumatic connectors are used to connect pneumatic components, and miniature connectors are used to change the inlet air pressure or change its direction. Pneumatic fittings are considered as precise tools in control. Air or pneumatic connections are one of the most important parts in the compressor. Without these parts, you cannot use the air effectively and even if the device is not installed correctly, the compressor may be damaged. We have included the best pneumatic (air) fittings in our product list for your review so that you can find the right part to meet your compressor needs. Having a reliable quick connect for air compressors is exactly the difference between a quality compressor and a serious hazard, and can help the consumer increase the compressor's air supply and possibly manage more complex connections. To optimize the life of your equipment, invest in buying high-quality and durable connections. These connections are the link between pipes, hoses and machines. Therefore, having a complete communication is essential for safety. This SP4000 large body metal flow control is very suitable for controlling air flow pressure and directional flow. SP4000 large body metal intermediate flow control components Pneumatic fittings may include parts such as pipes, tubes and hoses. Hose: Layers of different materials are used to make the hose. Hoses are highly flexible and provide suitable conditions for the movement of parts. Hoses need to be replaced after some time. It becomes necessary to replace the hose when it wears out. Pipe: Solid materials are used to make the pipe. These types of joints appear hard and rigid. tobacco pipe: Pipes are also made of solid materials and have significant hardness. Pipes are less flexible than pipes. The way the parts work and connect in the pneumatic system is different. In fact, this difference in appearance causes the existence of the above-mentioned SP4000 large body metal flow control in various forms. L fittings Some of these connections are L-shaped or elbow. L joints are introduced as angle joints. The angle considered for L connections is 90 degrees. L-shaped pneumatic connections allow multi-purpose or single hoses to be connected. With a pneumatic elbow fitting, the connection of the system can be easily changed by means of a set of pipes. These types of connections are very compact and require little space. Pneumatic fitting is very useful and excellent for working with nylon pipes. Direct connections Pneumatic connections can be of direct type. In direct connections, one direction of the part is connected to the hose or pipe and the other direction is connected to other parts of the system. Bolts and nuts are used to fix these connections. The pneumatic direct fitting acts as an adapter. These fittings are available in different materials, thread sizes, diameters and grades. Direct pneumatic connections can be used with various tools. For this reason, direct connections are used a lot in the pneumatic system. T connection Pneumatic connections can be T-shaped. These connections are used with a pressure mechanism. T-shaped fittings are intended for safe and secure connection to threaded ports and support quick and easy installation without the need for tools. By establishing this connection, the parts can be placed side by side in a three-sided form. The most common application of T-shaped fittings is related to pressure or vacuum applications. The leakage of these T-shaped connections is very low and these connections are designed in the form of a complete hole. Y joints Y-shaped pneumatic joints can be used for various things such as air tools, textile, transportation applications, automotive, industrial airlines, garages, packaging, robotics, etc. Pneumatic Y-shaped connectors with features such as disconnecting and connecting the head | SPSA model digital pressure switch The SPSA digital switch pressure switch works by combining the mechanical properties of compressed air and electricity. Pneumatic pressurizer is a device for controlling and adjusting pressure that is used in compressed air lines. The switch has the concept of changing the situation, which means that in case of any type of pressure change in the pressure system, the switch controls or secures the situation. This product is one of the precision instrument equipment. Pressure works in two normally open and normally close contacts. In the normally closed state, the contacts are closed in the normal state, when the pressure rises too much, the contacts open in order to reduce the pressure. In the normal open mode, the switch remains open until the pressure exceeds its limit, and the contacts close quickly as the pressure rises. To buy SPSA model digital pressure switch, you should pay attention to things like working pressure range, adjustable maximum pressure, connection size, etc. What is SPSA digital pressure switch or pressure switch? Pneumatic pressure switch or pressure switch is a pressure control switch and is used to adjust the pressure of tanks or prevent pressure increase in pressurized environments in the industry. SPSA model digital pressure switch or pressure controller has an electrical contact and when the pressure reaches the set value, the contact is activated and an electrical signal is sent and the switch is cut off. SPSA model digital pressure switch SPSA model digital pressure switch Also, pressure switches may be designed in such a way that they disconnect or connect the system when the pressure increases or decreases. SPSA model digital pressure switches play an important role in establishing safety and control in pressurized systems, also pressure switches have different types according to usage, working pressure and fluid. How SPSA model digital pressure switch works Normally, pressure switches have a diaphragm filled with air. When the air pressure inside the diaphragm changes, the diaphragm plate changes its shape and causes movement in the calibrated spring connected to it (spring calibration means the previous adjustment of the spring in The required size is the same as the range of the switch). The spring is pushed back by applying pressure and returns to its original position when the pressure is removed. This action is transferred to the electrical contact of the pressure switch and causes the operation of the pressure switch. The spring is set in different ranges for low or high pressures. Depending on the selected range, this spring opens or compresses. Depending on the type of fluid or gas that comes into contact with the diaphragm, the diaphragm has different types, such as: fibrous, plastic, Metal and.. SPSA model digital pressure switches Differential pressure switch Diaphragm switch pressure Capsule pressure switch Diaphragm switch pressure Bellows pressure switch Bardoni pressure switch Piston pressure switch SPSA model digital pressure switch in terms of working fluid Pneumatic Hydraulic SPSA model digital pressure switch This type of pressure switch is an air pressure switch and is one of the simplest types of pressure switches and is mostly used in pneumatic systems or air compressors. Other applications of pneumatic pressure switches include the following: When taking water, it automatically controls the domestic water pump, taking into account the pressure in the pipes. This pressure switch automatically turns off the air compressor when the pressure reaches the set level in the air compressor tank. The pneumatic pressure switch is used to control the charge inside the battery cell. If the pressure in the cockpit becomes too low due to the increase in altitude, it will automatically turn on the warning light in the cockpit of the aircraft. This switch is used to count the traffic of vehicles on the streets and fuel stations using a tube filled with air placed on the floor of the street or work station. Hydraulic pressure switch These types of pressure switches have many uses in cars, for example to warn if the engine oil pressure falls below the safe level. Before the 1960s, pressure switches were used in the hydraulic brake circuit to control the power to the brake light. In newer cars, it uses a switch directly activated by the brake pedal. The types of high-pressure hydraulic switches are as follows: Steam pressure switch gas Explosion Proof Water We will explain it further. Steam switch pressure: Their function is with steam. Steam pressure switches must be able to withstand high temperature and humidity. Steam pressure switches are used to cool water, oil, air and hydrogen fluoride. These types of pressure switches are NC or NO, and when the pressure reaches the set values, the alarm is turned on. Gas switch pressure: In this type of pressure switch, sparking in the electrical part should be prevented as much as possible. Gas pressure switches are also used for flammable gases. Explosion-proof pressure switch: This type of pressure switch is used in cases where there is a risk of fire caused by sparks and flammable gas. The explosion-proof pressure switch enclosure is resistant to sparks and the penetration of environmental gases. Water switch pressure: This type of pressure switch is used in hydraulic industries such as automobiles to display a warning when the engine oil pressure is lower than the acceptable level or to control the automatic locking of the automatic transmission torque. Also, these pressure switches are widely used in water pumps and water supply lines. | Mini finger cylinder APM model The pneumatic pen jack is one of the types of pneumatic jacks. This jack is a mechanical device that moves due to air pressure. APM model finger mini cylinder is used in lighter jobs and is used less than other types of jacks. It has pneumatics. Mini finger cylinder APM model APM mini cylinder finger pneumatic pen jack is powered by compressed air, and as a result of this pressure movement is created. This movement can be inside and outside or up and down. Compressed air pressure causes a series of actions that occur regularly. The compressed air passes through a path and reaches the jack. After entering the compressed air, the pneumatic pen jack makes reciprocating movements. Mini finger cylinder APM model Mini finger cylinder APM model APM mini finger cylinder works like other types of pneumatic jacks by air pressure. In fact, air pressure causes reciprocating movement. which is available in the market in two types, one-sided and two-sided. In the one-way type of air cylinder, a pneumatic pen is placed at one end of the piston at the air inlet, and the air pressure enters the piston from one inlet. In this situation, the forward movement happens and the backward movement is done by other devices such as a spring. In the two-way type, the air inlet is placed at both ends of the pneumatic jack piston. In this case, the air pressure enters the piston from one side and causes it to move forward. Then another air pressure enters the piston from the second hole and pushes it back. How to choose APM model finger mini cylinder 1- One of the most important issues is the force produced by the cylinder, which should be paid attention to. 2- Another point of course jack is how much the cylinder should be moved. 3- Another point is the place where the jack is closed. 4- Another issue is the type of jack (clampy jack, pencil jack, compact jack, profile jack, four shaft jack, double shaft jack or guided jack, rotating jack and other types of jacks) 5- Whether the jack is simple or magnetic 6- Ability to place the sensor The formula for calculating the force of pencil and round cylinders The formula for calculating the force of a round pneumatic cylinder has a direct relationship with the diameter of the cylinder and the pressure of the system. We explain the formula for calculating the amount of power of the APM pneumatic finger cylinder model below: F=P*A Force = cylinder cross-sectional area * system working pressure If our cylinder is spring-returned or spring-returned (one-way jack), the above formula is true. But if the pneumatic jack is a double-sided pen, the diameter of the cylinder is high in the forward direction and does not change, but in the return, because the jack shaft reduces some of the jack's cross-section, that amount must be reduced from the effective amount of the jack. units force in kilograms (F) Pressure per load (P) cross section (A) Calculation of pneumatic jack section: The value of the diameter or the first number is in millimeters and we convert it to centimeters, then we get the value of the radius by dividing it by two, and now we calculate the area of the circle according to the formula. The cross-sectional area of the cylinder = 3.14 * radius (cm) * radius (cm) For example, consider a 200x200 pneumatic jack, whose cross-sectional area is 314, which, if multiplied by its pressure, equals its production force. In double-sided cylinders, in the step of calculating the cylinder diameter, the amount of the shaft is reduced and then the rest of the steps are performed (of course, in the return step of the jack), because the cross-section is complete in the step of going. In guided cylinders, since there are two cylinders, the production force is doubled. About the structure of APM finger mini cylinder The external body of the APM pneumatic finger cylinder is made of aluminum or stainless steel. It is highly resistant to corrosion. Some of these jacks have cushions that are placed as a buffer between cylinders and machine tools. Both ends of the body have different types of shaft sizes and jack stroke lengths. The pneumatic one-way pen jack has only one air pressure regulator. Usually, in this type of pneumatic cylinder, the piston is rotated outwards with a spring and by doing this, it returns to the rear. The pneumatic pen cylinder has two-way stretching and contraction movement. Compressed air is directed through two inlets on each side and creates forward and backward movement. Mini finger cylinder APM model Mini finger cylinder APM model Components of APM model finger mini cylinder Aluminum or steel body piston Packing and O-ring magnet Chrome or steel shaft Characteristics of APM pneumatic finger mini cylinder Each type of pneumatic cylinder, such as a pen jack, has its specifications, according to which we can compare a product with other products of different bodies. In the following, we mention 3 main characteristics: Course: Each cylinder has a piston and each piston has a value called stroke. It is called the distance between the first point of the cylinder shaft and the end point of the course. The unit of this distance is mm. This distance shows the displacement of the equipment connected to the jack. Piston rod diameter: We must pay attention to the diameter of the piston shaft when choosing a pneumatic pen jack. The diameter of the piston has different sizes, these sizes are effective in long movements. They are also effective in keeping the piston rod healthy. If the diameter of the piston rod is small Long movements cause bending and breakage. For this reason, you should pay attention to the diameter when choosing a pneumatic jack. Impact rate: Each of the types of pneumatic jacks and other cylinders and mini finger cylinders of the APM model do not move in only one initial and final path. In every movement in the piston of the pneumatic jack, shocks are applied to the piston, which destroys the piston after the passage of time. Ray is considered a shock absorber from the impact of these impacts to prevent damage to the piston. Mini finger cylinder APM model Mini finger cylinder APM model Uses of mini finger cylinder APM model The pneumatic pen jack has an effective performance and is mostly used in tasks that transfer light weight objects. The pneumatic pen cylinder is used to transfer medium weight objects. Also, usually in assembly line equipment such as cars They are also used in packaging and production. Pneumatic jacks are used in most of the production and manufacturing lines of industrial parts and medical equipment, etc., which we will mention below: The production line of dairy factories Ceramic production line Iran Khodro production line Etc.. The price of mini finger cylinder APM model The price of pen pneumatic cylinders depends on various factors such as brand, quality, diameter and stroke length. And their prices are different. Pneumatic pen cylinders have reasonable prices and excellent quality that can be seen and purchased in the market. | SQ model automatic fitting Pneumatic fittings are used to connect different parts of the pneumatic system, hoses and pipes. Pneumatic fittings are stronger and more resistant than hydraulic fittings. For this reason, while connecting parts in pneumatic systems, less pressure is applied to the connections and parts. Pneumatic connections or fittings are used to create a connection between the parts and components of a pneumatic system and circuit. For example, in a pneumatic system that includes a pneumatic valve, a pneumatic jack with speed control, various connections are used to connect these components to each other and to the compressed air of the main inlet. Pneumatic fittings are among the most widely used pneumatic devices that are used to connect and communicate between different components of pneumatic systems. By purchasing the pneumatic SQ model automatic fitting, you will see an increase in the speed of operation in the progress of pneumatic systems and works. Due to the fact that pneumatics are made up of different components, it is obvious that you will need to purchase several pneumatic fittings in different dimensions and features. Similarly, in building water piping, various connections such as elbows, bushings, spools, etc. are used to connect different components (such as pipes to each other, pipes to faucets, etc.). SQ pneumatic automatic fitting is made of various materials such as polymer and metal materials (iron with chrome coating and brass). SQ model automatic fitting application Pneumatic connectors are used to connect pneumatic components, and miniature connectors are used to change the inlet air pressure or change its direction. Pneumatic fittings are considered as precise tools in control. Air or pneumatic connections are one of the most important parts in the compressor. Without these parts, you cannot use the air effectively and even if the device is not installed correctly, the compressor may be damaged. We have included the best pneumatic (air) fittings in our product list for your review so that you can find the right part to meet your compressor needs. Having a reliable quick connect for air compressors is exactly the difference between a quality compressor and a serious hazard, and can help the consumer increase the compressor's air supply and possibly manage more complex connections. To optimize the life of your equipment, invest in buying high-quality and durable connections. These connections are the link between pipes, hoses and machines. Therefore, having a complete communication is essential for safety. This SQ model automatic fitting is very suitable for controlling air flow pressure and directional flow. SQ model automatic fitting components Pneumatic fittings may include parts such as pipes, tubes and hoses. Hose: Layers of different materials are used to make the hose. Hoses are highly flexible and provide suitable conditions for the movement of parts. Hoses need to be replaced after some time. It becomes necessary to replace the hose when it wears out. Pipe: Solid materials are used to make the pipe. These types of joints appear hard and rigid. tobacco pipe: Pipes are also made of solid materials and have significant hardness. Pipes are less flexible than pipes. The way the parts work and connect in the pneumatic system is different. In fact, this difference in appearance causes the automatic connection (fitting) of the mentioned SQ pneumatic model in various forms. L fittings Some of these connections are L-shaped or elbow. L joints are introduced as angle joints. The angle considered for L connections is 90 degrees. L-shaped pneumatic connections allow multi-purpose or single hoses to be connected. With a pneumatic elbow fitting, the connection of the system can be easily changed by means of a set of pipes. These types of connections are very compact and require little space. Pneumatic fitting is very useful and excellent for working with nylon pipes. Direct connections Pneumatic connections can be of direct type. In direct connections, one direction of the part is connected to the hose or pipe and the other direction is connected to other parts of the system. Bolts and nuts are used to fix these connections. The pneumatic direct fitting acts as an adapter. These fittings are available in different materials, thread sizes, diameters and grades. Direct pneumatic connections can be used with various tools. For this reason, direct connections are used a lot in the pneumatic system. T connection Pneumatic connections can be T-shaped. These connections are used with a pressure mechanism. T-shaped fittings are intended for safe and secure connection to threaded ports and support quick and easy installation without the need for tools. By establishing this connection, the parts can be placed side by side in a three-sided form. The most common application of T-shaped fittings is related to pressure or vacuum applications. The leakage of these T-shaped connections is very low and these connections are designed in the form of a complete hole. Y joints Y-shaped pneumatic joints can be used for various things such as air tools, textile, transportation applications, automotive, industrial airlines, garages, packaging, robotics, etc. Pneumatic Y-shaped connections are introduced with features such as fast disconnection and connection and tank strength against vacuum. Functional connections Pneumatic fittings can be divided according to the type of function. The body of the pneumatic fitting can be copper, aluminum, steel, PBT and Bern. Functional pneumatic fittings are used for functions such as shut-off, flow regulation, supply, exhaust and blocking. Communication connections Pneumatic fittings are also classified according to the type of connection. Ball joint Ball pneumatic fitting is used to connect the outer sleeve to the inner fitting. Sleeves are used to disconnect and connect two ends of connections. This type of connection is used for things that require frequent connection and disconnection of the hose. Compressor connection The connections mentioned can be compression or compressor type. In this type of connections, pressure is used to establish the connection. Rings, metal washers and ferrules are used for standard compression and connection. In such a case, the nut is used on the ferrule and pipe for compression. With this nut, it is possible to strengthen and compress the parts together. SQ model automatic fittings Pneumatic fittings are differentiated based on the type of connection and the function they perform. And they are produced in different sizes and types, each of which is used in different uses. Among these connections, we can mention the direct connection, which is available in direct allen-khor, panel direct, plastic bead direct, and direct connection between ways. One of the most widely used pneumatic parts are pneumatic tees. There are different types of tees, tees that feed hoses or tees with hose heads, tees in the middle of the rib and inside the thread, and miniature tees are of this category. The variety of pneumatic connections is very large. In general, connections can be divided into four main parts. 1- Connections with only connection function: This type of connections can be divided into the following two types: 1- Connections with one gear end and one hose end 2- Connections with two hose ends Connections with a gear end and a hose end It is used to connect pneumatic hoses to pneumatic valves or pneumatic manifolds. When buying this type of connection, you should pay attention to the size of the gear, the standard of the gear, the size of the connecting hose, the type of gear (male or female), whether or not it has O-rings, and the physical shape of the connection. SQ model automatic fitting Connections with two hose ends It is used to connect two pneumatic hoses to each other or change the connection size. For example, PUC-06 connector is used to connect two size 6 hoses. When buying this type of connection, we should pay attention to the size of the hose and the physical shape of the connection. 2- Connections with special functions: In addition to connecting two parts, this type of connections also have the following special functions. Types of flow controller: Flow controls are used to control flow rate or air flow. One of the important applications of flow control is controlling the movement speed of pneumatic jacks in the industry. Fluocontrollers are available in different types of flowcontrollers (with two hose feeding ends) and jackhead flowcontrollers (to connect to pneumatic jacks). SQ model automatic fitting. Stop fittings: In addition to the connection, these parts act as a one-way valve, and if the hose is placed in it, the air flow is established, and if the hose is removed, the air flow is automatically cut off. In using this connection, you should pay attention to its input and output. When buying, we should pay attention to the size of the hose and its thread. SQ model automatic fitting Check Valve: This type of connection is used to make the air path unidirectional. In using this connection, you should pay attention to its input and output. Also, when buying, you should pay attention to the size of the hose and its thread. It should be noted that the maximum working pressure of pneumatic connections is 10 bar, and if the pressure increases beyond this amount, there is a possibility of leakage and disconnection of the connection. SQ model automatic fitting 3- Connections for acidic substances and water: There are also connections that are completely made of plastic and are used for water and acidic things. SQ model automatic fitting 4- Couplings: Couplings are used to temporarily connect two parts of a system. For example, in gas pumps, the fuel nozzle is connected to a coupling, and when refueling, this nozzle is connected to the car's gas tank by the coupling, and after refueling, it is separated from the car. Couplings are available in various sizes and in the form of male and female threads, hose connectors, and you should pay attention to these items when buying. SQ model automatic fitting Special features of SQ model automatic fitting • The pneumatic fitting can withstand a working pressure of 24 bar according to the size of the design. • The ability to install and use pneumatic system connections is very convenient and easy. Therefore, this SQ model automatic fitting will be different from other systems. • The rib part of the fittings is made of brass and PBT material can be seen in their body part. • The metal parts of the connections are also plated with nickel or zinc. • NBR O-rings are used to prevent leakage of connections. • Connections of the pneumatic system are supplied in the form of three-way middle rib, swivel knee, straight, etc. This diversity in design causes diversity in the application of SQ model automatic fitting. • Various types of NPT, BSPT, METRIC and BSP are used for SQ model automatic fittings. Important cut when using SQ model automatic fitting After purchasing Etsa L (fittings) SQ pneumatic automatic model, when using these pneumatic parts, you should pay attention to a series of points and do not use pneumatic connections in the following conditions: 1- For other uses other than what that particular pneumatic connection was designed and made for. 2- Never touch the part of the automatic connection (fitting) of the SQ pneumatic model when they are under pressure. (Because this will cause the hose to separate and lead to damage). 3- In places where excessive external pressure is applied to the pneumatic connection due to stretching, bending or twisting (because it causes the body of the pneumatic connection to break and create dangerous situations). 4- In places where there is excessive vibration, rotation and bending. 5- In places where SQ pneumatic automatic fittings are exposed to corrosive, inflammable fluids, chemicals, sea water, or water vapor. Also, when buying pneumatic SQ model automatic fittings, you should note that these parts should not be used in machines that are used for purposes such as human life safety, human transportation, or emergency safety tools in general. Use SQ pneumatic automatic fittings only when all impurities such as dust have been removed from them. | ||||||||||||||||
| Weight | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||||
| Dimensions | N/A | N/A | N/A | N/A | N/A | N/A | ||||||||||||||
| Additional information |
|
|
|
|
|
|
Related products
● This product turns compressed air on/off on compressed air devices by just turning the knob.
● Once the residual pressure in the device is removed, maintenance or inspection is possible
● A three-way valve relieves residual pressure and blocks the intake air.
● Minimizes installation time and cost
● 360 body rotation.
● The speed can be accurately controlled even at low speeds
● Constant speed is easily adjusted
● ONE ACTION inserts tube for easy attachment and release
● The volume and OD are smaller than the conventional type, but the same flux is obtained
● Surface treated with electroless nickel plating for excellent corrosion resistance
● The oval sleeve is designed to be easily released in confined spaces
● The screw part has O-rings or has a sealant coating
● Small fittings for small appliances and piping in confined spaces
The 150-550 series can be combined with other modular equipment
The TAM series removes micro particles such as rust, carbon 0.1 micron or larger, etc. By separating oil mist that conventional air filters may struggle to remove.
The TAM series is the optimal filter for use with any air source that drives both PILOT type and metal type solenoid valves.
Reviews
There are no reviews yet.